This indicates that your booster is functioning properly and at maximum gain.Ĭheck/secure power connections to the CLA, booster, and cradle. IMPORTANT: The FCC requires to never use the cell phone in the cradle next to your ear. NOTE: A magnetic mount is provided which provides a versatile, safe and functional smartphone solution. Insert your phone into sleek cradle and watch your signal increase! Make sure you have plenty of slack in the cable going up to the cradle (Velcro® straps included to manage excess cable). If your vehicle always has power going to this port, you may want to unplug this when you’re not driving so the booster does not drain your battery. NOTE: The booster will be on whenever there is power from the 12V CLA port. NOTE: We recommend routing with the same path as the cradle/booster cable (under mats and between seats). Connect System To PowerĬonnect the power to the 12V* CLA port on your vehicle and route power cable back to the booster. Place booster behind seats or in back area of vehicle and route the 15 foot fixed cable to the front of the vehicle where the cradle will be located.Ĭonnect booster cable to sleek cradle cable. Route Fixed Booster Cable & Connect To Cradle NOTE: The “hook” side of the Velcro® (already on the booster) can be used to attach to the carpet of many vehicles. It is best to mount in a place where the cables cannot be tripped over or snagged (damaging the booster). The included Velcro® can be used to mount the booster out-of-the way on the ﬂoor under a seat or mounted in the back of the cab. NOTE: Connecting cable from outside antenna to booster does not take much force. If installing with the antenna spring, disassemble and reassemble the 3-way mount as shown below.ĭisassemble Route Outside Antenna Cable & Connect BoosterĬonnect the cable from the outside antenna to the cable adapter then to the booster port labeled ANTENNA by simply pressing the connector in until you hear a “click”.

Truck antenna booster